Brass Compression Fittings - Sleeves - 3/16

FREE shipping over $99! Easily shop in stock brass compression fitting sleeves - 3/16" compression sleeve (ferrule) brass tube fitting - for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.
  Applications: Use with copper, aluminum and thermoplastic tubing. Plastic tubing requires insert. Not recommended for steel tubing. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved. Not recommended for application using gaseous media. Not lead free* Operating Pressure: View table here for working pressures at 73°F Vibration: Fair resistance - use long nut when greater vibration resistance is needed Temperature Range: Temperature Range -65°F to +250°F (-53°C to +121°C) range at maximum operating pressures. (Refer to tubing temperature range) Tolerance: +/- .02 on all dimensions. Dimension data can change without notice. Please call us when dimensions are critical. Conformance: Meets specifications and standards of ASA, ASME and SAE. Special Notes: L at the end of a Part# means Light Pattern These fittings are completely interchangeable with full pattern fittings, but have been modified in some way. This modification is usually in the length of the pipe threads. Used in plumbing and light industrial applications. PDF / Specs / Brochure Technical Data / Assembly Instructions Full Brass Compression Catalog & Size Offering Additional

Applications: Use with copper, aluminum and thermoplastic tubing. Plastic tubing requires insert. Not recommended for steel tubing. Manufactured for

3/16 in. Insert (Sleeve) - Brass Compression Fitting (.135OD .45LGTH)

Male Union Brass Compression Fittings

91109 Compression Fitting Union With Captive Sleeve, Brass, 3/16

LTWFITTING 3/16 in. Brass Compression Nut Fittings (50-Pack

Brass Compression Fittings - Sleeves - 3/16

Applications: Three piece construction- nut, sleeve (or ferrule) and body Use with copper, aluminum, or plastic tubing (plastic requires 60P sleeve

3/16 in. Tube OD - Insert (Sleeve) - AB1953 Lead Free Brass Compression Fitting

Brass Compression Fittings Standard Sleeve Tube 3/16 in. - No tube flaring necessary - Manufactured for low and medium pressure work. - Use Wurth Pipe

Brass Compression - Fittings Standard Sleeve - 3/16 Inch Tube

66C-0606 Dixon Valve Brass Compression Fitting - Female Connector

5/16-24 to 3/16 compression fitting with nut and ferrule.

Brass Compression Nut Fitting China Wholesaler - Topa

60X3 by Danfoss, Compression Fitting, Sleeve

Applications: Three piece construction- nut, sleeve (or ferrule) and body Use with copper, aluminum, or plastic tubing (plastic requires 60P sleeve

3/16 in. Tube OD - Nut w/Captive Sleeve - AB1953 Lead Free Brass Compression Fitting

This LTWFITTING Compression Sleeve fitting is made of brass. Often used between fittings and tubes, and is suitable for use with water, gasoline, oil,

3/16 in. Brass Compression Sleeve Fittings (250-Pack)