Z Compression Correction? - Form 3/3+ - Formlabs Community Forum

I’m printing directly on the build platform (V2) and am having trouble getting the height of the parts close to size. I started with the default settings and my part came out 0.9mm too high. I adjusted the z compression correction to 0.0mm and my part is still 0.2mm too high. How to I adjust it further to compensate? Also, how do I avoid the edge highlighted in the second image where the part sits on the build plate? Thanks. (I’m printing directly on the platform for speed of print and surfac

marrs

Z-Compression Correction question - General Discussion - Formlabs Community Forum

DDL2021 Digital Proceedings by info-ddl-conference - Issuu

PDF) 3D Printing a Mechanically-Tunable Acrylate Resin on a Commercial DLP-SLA Printer

Glazing of 3D-Printed Silica to Reduce Surface Roughness and Permeability

Form 2 Accuracy problem, shrinkage in Z-direction - Form 2 - Formlabs Community Forum

Advances in 3D bioprinting technology for functional corneal reconstruction and regeneration. - Abstract - Europe PMC

Prints resolution/distortion in area of supports and surfaces facing platform - Form 3/3+ - Formlabs Community Forum

Formlabs Form 3 - Error code 148 - Solved

Instruments, Free Full-Text

Sensors, Free Full-Text

PDF) Characterization of mechanical stiffness using additive manufacturing and finite element analysis: potential tool for bone health assessment

Lift Z Not Occurring Despite being Enabled – Hardware, firmware and software help – Prusa3D Forum

Formlab 3 precision is worst than FDM - Form 3/3+ - Formlabs Community Forum