Lead Free Brass Compression Fittings - 45 Degree Elbows - 1/2

Easy shop best prices on quality lead free brass compression tube fittings. IN STOCK: 1/2 in. Tube O.D. x 3/8 in. MIP - Male 45 Degree Elbow - Lead Free Brass Compression Fitting (LF 76945). LF Lead free brass tube compression adapter fittings for oil, gas, water & vacuum lines.
  Applications: Three piece construction: nut, sleeve (or ferrule) and body Use with copper, aluminum, or plastic tubing (plastic requires 60P sleeve and 61P insert) Easy to disassemble, no flaring tool required Temperature Range: -40° through +250° F Primary uses: water, gasoline, oil, and vacuum lines MIP stands for Male Iron Pipe. MIP threads are a type of National Pipe Taper (NPT) thread. NPT threads are the standard for pipe fittings in the United States. MIP threads are male threads, which means they are designed to fit into a corresponding female thread. MIP threads are often used in heavy-duty threaded pipe connections. They are commonly found in residential homes and are usually found on the ends of valves intended for use with copper tubing. MIP threads can be used in systems that require high pressure, such as industrial piping systems. They are also commonly used to connect a gas line to a gas dryer, range, water heater, or furnace. MIP threads are not always made of iron. They are commonly made from steel and brass as well. MIP threads are designed to fit into a corresponding female thread. FIP stands for Female Iron Pipe. FIP fittings have threads on the inside. End Connection: Tube Compression End x Male Pipe Threads 45 Degree Elbow Operating Temperature Range: Temperature Range: -40° through +250° F Size Range: Tube OD Ranges- 1/8" up to 7/8" Install / Assembly Instructions: Cut smooth, square end on tubing Slide nut, then sleeve onto tube (threads must face end) Insert tube into fitting Thread nut onto fitting until snug Nuts and sleeves included with each fitting PDF / Specs / Brochure Catalog & Assembly Information: Lead Free Brass Compression Fittings

Male NPT 45° Compression Coupling

1/2 Copper Press x 1/4 OD Compression Quarter Turn Straight Stop

5503 - NPT to NPT Elbow NPTF Pipe 45 Street Elbow

LTWFITTING 1/2 in. O.D. x 1/2 in. MIP Brass Compression 90-Degree

Applications: Three piece construction: nut, sleeve (or ferrule) and body Use with copper, aluminum, or plastic tubing (plastic requires 60P sleeve

1/2 in. Tube O.D. x 3/8 in. MIP - Male 45 Degree Elbow - AB1953 Lead Free Brass Compression Fitting (LF 76945)

Parker Female Elbow, 45 deg., 1/2 in. Thread Size 179PTC-8-8

RED BRASS FITTINGS CAN BE UTILIZED IN LOW PRESSURE APPLICATIONS FOR WATER OIL AND GAS (W.O.G.). FITTINGS HAVE PRESSURE RATINGS OF 125 PSI FOR STEAM

1/2 In. Lead Free Brass 45 Degree Elbow - FNPT - 125 PSI - Import

BRASS INVERTED FLARE 45 DEGREE ELBOW - SAE 040302

540808 Midland DOT Push-In Fitting, Male 45° Elbow

★ Lead Free Compliant Brass.Easily installed without flame, flux, or solder and requires no bonding agents, glue, or solvents. ★ 3/4 PEX 90 Degree

Litorange 3/4 inch PEX 90 Degree Elbow 3/4 (pack of 8) Lead-Free Brass Barb Crimp Pipe Fitting/Fittings

JMF Lead Free MIP Elbow - LF3923504049813

Plumbing - Pipes & Fittings - Anderson - Pecos, TX - Gibson's