An easy and reversible lift kit! – Flyin' Miata

Paco Motorsports 3" suspension lift kit
Now available! We worked with Paco Motorsports to improve the design of these. They're now more stable, stronger and are easier to fit. Just look at that picture. Doesn't it make you giggle? This is a clever piece of work from Paco Motorsports. This is a bolt-on lift for NA and NB Miatas. It basically extends your lower shock mounting point. Ride height will increase by 3 in the front and 3.25 in the rear. You can run tires up to 25.5 in diameter on an NA without fender modifications, but the front fascia on the late NB will interfere in this case. The car in the picture is on 215/65-15 tires, which are 26 in diameter and required some light massaging. Installation is easy and 100% reversible. You will not gain any travel, your car will sit higher with the same amount of compression and droop travel that you have now. Keep in mind that your alignment will change with the increased ride height, and you will be limited in how much negative camber you can obtain. This is not liable to be a problem, as you're not going to want a track alignment when you're set up for gravel roads or dirt. But you should be aware. If you really do need extreme amounts of camber along with a high ride height, you can add our extended lower ball joints and Paco Motorsports adjustable rear upper control arms. But they won't be necessary in most builds. Installation note: Please be aware that we are exploring the edges of sanity here. You may come across problems with wheel fitment or new and exciting interference problems with different spring/shock assemblies. Be prepared to deal with them. We have learned that some stock wheels (14 daisies and 2001 15 wheels) interfere with stock springs at full droop with this kit. There have also been reports of difficulties installing with stock shocks. You will have to fight against the bushings in the upper mounts to get the shocks to line up at full droop. There could be shock to control arm contact with certain setups at full droop.  Sold as a complete set. Made of powdercoated steel.

ZOOM Trunk Rack For Mazda Miata MX-5 NC 06-15, REV9

AVO MX5 ND STAGE 2 TURBO KIT 2016-2023-AVO-ND-S2

LED License Plate Lights for F'ord Escape Mazda MX-5 Miata Protege MPV, 18-SMD Xenon White Built-in Canbus Led Number license Plate Lamps OEM Replacement : Automotive

Hood Lift Kit by Cobalt! Adding a SINGLE gas hood strut to the Miata is easy!

First time Miata owner here, what tips & tricks should I know? : r/Miata

Looks great and offers more access. Dual struts for a nice even lift. What's not to love? – Flyin' Miata

Had it for 3 weeks now, what an incredible engine bay! : r/Miata

16 Miata ideas miata, mazda mx5, mazda

Hood Lifts MX5 Miata ND

YHTAUTO 2PCS Rear Trunk Deck Lid Lift Supports Gas Struts Replacement for 2006-2013 Mazda MX-5 Miata Convertible with Retractable Hardtop : Automotive

20 Buggy ideas buggy, miata, mazda mx5 miata